https://mydiamondcoredrill.com Thu, 08 Oct 2026 00:21:40 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://mydiamondcoredrill.com/longyear-model-142-core-drill-rig-stand-max-800mm-diamond-drilling-used/ https://mydiamondcoredrill.com/longyear-model-142-core-drill-rig-stand-max-800mm-diamond-drilling-used/#comments Sun, 04 Oct 2026 00:12:55 +0000 https://mydiamondcoredrill.com/longyear-model-142-core-drill-rig-stand-max-800mm-diamond-drilling-used/










Longyear Model 142 Core Drill Rig Stand. Heavy-duty Longyear Model 142 core drilling rig stand, suitable for diamond drilling applications up to approximately 800mm. The stand has been well used in a working environment but remains operational. Well used with signs of previous use. Cosmetic wear, marks and general surface deterioration consistent with age and use. Some rubber rings/bungs are missing from the ends of the wheels. Despite the wear, the unit is working. Please study all photographs carefully for the overall condition. Type: Core drill rig stand. Maximum drilling capacity: up to 800mm. Suitable for diamond drilling applications. Please inspect all photographs carefully and satisfy yourself regarding condition, completeness and compatibility with your intended drilling equipment before purchasing.

]]> https://mydiamondcoredrill.com/longyear-model-142-core-drill-rig-stand-max-800mm-diamond-drilling-used/feed/ 0 https://mydiamondcoredrill.com/weka-heavy-duty-110v-core-drill-on-adjustable-drilling-rig-stand-working-order/ https://mydiamondcoredrill.com/weka-heavy-duty-110v-core-drill-on-adjustable-drilling-rig-stand-working-order/#comments Tue, 29 Sep 2026 12:01:44 +0000 https://mydiamondcoredrill.com/weka-heavy-duty-110v-core-drill-on-adjustable-drilling-rig-stand-working-order/









Top quality Weka heavy duty diamond core drill in working order. The rig is good – nice and smooth going up and down and has a thumb screw to hold the position in place. The rig has bolt holes on the base plate to be mounted to a wall.

]]> https://mydiamondcoredrill.com/weka-heavy-duty-110v-core-drill-on-adjustable-drilling-rig-stand-working-order/feed/ 0 https://mydiamondcoredrill.com/makita-diamond-core-drill-stand-tool-part-for-drill-application/ https://mydiamondcoredrill.com/makita-diamond-core-drill-stand-tool-part-for-drill-application/#comments Thu, 24 Sep 2026 11:49:40 +0000 https://mydiamondcoredrill.com/makita-diamond-core-drill-stand-tool-part-for-drill-application/


Makita Diamond Core Drill Stand Tool Part for Drill Application.

]]> https://mydiamondcoredrill.com/makita-diamond-core-drill-stand-tool-part-for-drill-application/feed/ 0 https://mydiamondcoredrill.com/eibenstock-110v-core-drill-and-stand/ https://mydiamondcoredrill.com/eibenstock-110v-core-drill-and-stand/#comments Wed, 09 Sep 2026 11:02:44 +0000 https://mydiamondcoredrill.com/eibenstock-110v-core-drill-and-stand/












For drilling large diameter holes in concrete Heavy duty three speed diamond drill, rig mounted Powerful motor & mechanical gearbox Dust free diamond drilling with vac Water feed for drilling reinforced concrete Quick release clamp for use with drill rig PLE450.1 is a powerful diamond drilling unit with a heavy duty three speed gearbox The drill is used with water feed for drilling reinforced concrete A quick release clamp is supplied for use with drill rig Max drilling with rig in concrete 452mm.

]]> https://mydiamondcoredrill.com/eibenstock-110v-core-drill-and-stand/feed/ 0 https://mydiamondcoredrill.com/220v-2300w-diamond-core-drill-press-concrete-drilling-machine-stand-o-165mm-new-3/ https://mydiamondcoredrill.com/220v-2300w-diamond-core-drill-press-concrete-drilling-machine-stand-o-165mm-new-3/#comments Wed, 26 Aug 2026 10:34:38 +0000 https://mydiamondcoredrill.com/220v-2300w-diamond-core-drill-press-concrete-drilling-machine-stand-o-165mm-new-3/









Product Description Our core drilling machine combines functionality and versatility in one device. It is ideal for lighter drilling work. Feature Water connection with hose approx. 6M Non water seal cage reduce maintenance costs Aluminum alloy material ligher and steadier Max. Drilling diameter 165mm Suitable for sampling concrete, cement, brick, bituminous pavement and block Specifications Color: Red Rated input power: 3300W Rated voltage:220V Rated frequency: 60Hz The largest drilling capacity: 6.5 inch No-load speed: 800r/min Spindle thread:M22(22mm) It fit M22 Drill Bit(sale Separately) The Spindle thread is not 1 1/4!!! Installation: First, install the screw connecting the stand and the pedestal. Before use the drill, you need to fix it. Remove the two screws on the back of. 220V 3300W Diamond Core Drill Press Concrete Drilling Machine Stand Ø 165mm NEW. Welcome to our store. 220V 3300W Diamond Core Drill Press Concrete Drilling Machine Stand ø 165mm UK. Our core drilling machine combines functionality and versatility in one device. Drilling diameter 165mm Suitable for sampling concrete, cement, brick, bituminous pavement and block Details Color: Red Rated input power: 3300W Rated voltage:220V Rated frequency: 60Hz The largest drilling capacity: 6.5 inch No-load speed: 800r/min Spindle thread:M22(22mm) It fit M22 Drill Bit(sale Separately) The Spindle thread is not 1 1/4!! Remove the two screws on the back of the stand; 2. Seperate the stand and the pedestal; 3. Rotate the pedesta 180° and install the screws. Fix the driller: Here are two ways 1. Using expansion link Choose a hollow tube according to the height of the place which need to be drilled. Put one end of the tube against the adjustable screw rod. And turn the rod reversely to fix the driller tightly, expansion bolts are not needed. 2. Using ecpansion bolt Make a hole on the wall or the groud and install the bolt; Expand the bolt; Install the screw rod and the stand. Then tighten the nut. Install drill bit Before installing, you need to smear some grease on the drill end thread in order to discharge easily. After instlling, you need to run the driller at an idle state at first. Attention: Before you install or remove the drill bot, you must be sure the drill is powered off. Before running, the drill must be connected with clean cold water. Here are the ways to inject water: 1. Using tap water: Connecting the tap and the machine with the injecting hose. Hanging a bucket over the drill 3. Using water pump 4. Drilling Start the drill at an idle state. Then open the water tap. When there is water flowing from the drill, you can start drilling. At first, you need to drill slowly and increase strength gradually. After you drill deeper than 5mm, you can increase your push strength. If the drill’s rotating speed decrease, than proves that the drill is overloaded. Then you need to decrease the push strength, avoiding the drill being stuck. If there is smoke coming out, you must pull out the drill right away and start to drill after a while, avoiding the engine being burn down. 5. Material being drilled When drilling reinforced concrete, current increases and the drill will vibrate. Therefore, you need to decrease pushing strength but the decreasing amplitude should not be too big. Otherwise, the effiency will be affected and the drill bit will be worn more badly. When drilling reinforced concrete containing little grains of sand and small stones, the drill may be overloaded suddenly and the drill be powered off automatically. At this time, you need to pull out the drill right away and clean the hole you drilled before you start again. When you drill woof board and thick pitch, you also need to decrease pushing and drill slowly. 6. Taking out drill core When you are going yo drill through the board or wal, you need to slow down, avoiding the drill bit being stuck. If the drill bit is stuck, you need to power off the drill immediately pull out the bit and clean it. Fetch out the drill core. Install the drill bit and start again. Attention: You should be careful when taking out the drill bit, noting damaing it. Then you need to tighten the screws to adjust the distance. At the same time, you need to make sure that the pedestal and the stand is connected firmly. Application: This drill can be used on brick, stone, reinforced concrete, rock, and fireproof materials. Note: M22 drill bit and drill barrel are not included. Welcome O(? _?)O. France, Germany, spain, Italy. Feedback is very important to us. It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. High Quality, Long Service Life. 100% Brand New, With High Quality, Special Fashion Design, Easy installation, 3-year Wrranty. Unique Appearance, Great Durability. Compact Design, Convenient Use. The largest drilling capacity.

]]> https://mydiamondcoredrill.com/220v-2300w-diamond-core-drill-press-concrete-drilling-machine-stand-o-165mm-new-3/feed/ 0 https://mydiamondcoredrill.com/golz-diamond-core-drill-rig-110v-complete-with-stand-bbm33llextra-kb400/ https://mydiamondcoredrill.com/golz-diamond-core-drill-rig-110v-complete-with-stand-bbm33llextra-kb400/#comments Mon, 24 Aug 2026 22:30:41 +0000 https://mydiamondcoredrill.com/golz-diamond-core-drill-rig-110v-complete-with-stand-bbm33llextra-kb400/


















The GOLZ Diamond Core Drill Rig is a powerful 110v corded drill with a power output of 3300W, making it ideal for industrial drilling tasks. This complete set includes a stand for convenient storage and use. The brand Golz is known for producing high-quality drilling tools, ensuring precision and efficiency in your drilling projects. With its sturdy construction and reliable performance, the GOLZ Diamond Core Drill Rig is a versatile tool for various drilling applications. Core drill model number: BBM33LLextra. Stand model number: KB400. Please message any questions.

]]> https://mydiamondcoredrill.com/golz-diamond-core-drill-rig-110v-complete-with-stand-bbm33llextra-kb400/feed/ 0 https://mydiamondcoredrill.com/hilti-dd-160-e-diamond-core-drill-rig-110v-with-stand-accessories/ https://mydiamondcoredrill.com/hilti-dd-160-e-diamond-core-drill-rig-110v-with-stand-accessories/#comments Fri, 07 Aug 2026 21:53:59 +0000 https://mydiamondcoredrill.com/hilti-dd-160-e-diamond-core-drill-rig-110v-with-stand-accessories/




For sale is a complete, fully working Hilti DD 160 E Diamond Core Drill System mounted on its original Hilti rig/stand. This is a heavy-duty, commercial-grade 110V site tool perfect for concrete, masonry, and asphalt coring. It has been tested and the motor unit is in full working order. The motor runs strong and cycles smoothly through all gears. What’s Included:Hilti DD 160 E Core Drill Motor (110V)Hilti Heavy-Duty Drill Stand/Rig with crank handleGenuine Hilti Chuck AdapterWater supply connector fittingAnchor bolt & washer assemblyCondition Report:Mechanical: 100% operational motor and gearbox. The unit powers up instantly and the multi-speed gearbox functions exactly as it should. The rig can still be securely anchored down using traditional anchor bolts (included). Cosmetic: Used condition with typical concrete dust, scuffs, and surface wear from active job site deployment. These cosmetic marks do not affect the machine’s performance.

]]> https://mydiamondcoredrill.com/hilti-dd-160-e-diamond-core-drill-rig-110v-with-stand-accessories/feed/ 0 https://mydiamondcoredrill.com/diaquip-qdm-350-core-drill-3-speed-110v-stand/ https://mydiamondcoredrill.com/diaquip-qdm-350-core-drill-3-speed-110v-stand/#comments Fri, 07 Aug 2026 09:52:53 +0000 https://mydiamondcoredrill.com/diaquip-qdm-350-core-drill-3-speed-110v-stand/









Diaquip QDM 350 Core Drill 3 Speed 110v + Stand. In good working order and in good condition. Please see photos of machine as it will come how you see it. Please take a look at our other items. The Diaquip QDM 350 Core Drill is a powerful 110v corded tool designed for drilling tasks in industrial settings. With a power output of more than 2000W, this core drill is ideal for efficiently drilling through tough materials. Made in the United Kingdom by the reputable brand Diaquip, this 3-speed core drill comes with a stand for added stability and convenience during use. Perfect for professionals in the construction and drilling industries, the Diaquip QDM 350 Core Drill is a reliable and durable tool for various drilling applications.

]]> https://mydiamondcoredrill.com/diaquip-qdm-350-core-drill-3-speed-110v-stand/feed/ 0 https://mydiamondcoredrill.com/hilti-dd-80-ra-hl-core-drill-stand/ https://mydiamondcoredrill.com/hilti-dd-80-ra-hl-core-drill-stand/#comments Thu, 23 Jul 2026 09:16:43 +0000 https://mydiamondcoredrill.com/hilti-dd-80-ra-hl-core-drill-stand/




Used, in a working condition. Needs a clean up.

]]> https://mydiamondcoredrill.com/hilti-dd-80-ra-hl-core-drill-stand/feed/ 0 https://mydiamondcoredrill.com/hilti-dd-st-150-u-diamond-core-drilling-stand-102mm-hilti-core-bit/ https://mydiamondcoredrill.com/hilti-dd-st-150-u-diamond-core-drilling-stand-102mm-hilti-core-bit/#comments Sun, 19 Jul 2026 21:04:00 +0000 https://mydiamondcoredrill.com/hilti-dd-st-150-u-diamond-core-drilling-stand-102mm-hilti-core-bit/


















The HILTI DD-ST 150-U Diamond Core Drilling is a powerful and durable tool designed for industrial drilling tasks. With a corded power source and a voltage of 110V, this drill ensures consistent and reliable performance. The included stand provides stability and safety during use, while the 102mm Hilti Core Bit allows for efficient and precise drilling. Perfect for business, office, and industrial applications, this core drill and rig set by Hilti is a versatile and essential tool for any professional drilling needs. The core rig can be set for different drilling angles. Unit has only been used to core 12 holes through reinforced concrete so still like new, has some very minor marks on the base and concrete splatters tried to capture them in photos. Comes with holding down plat + bar and 50 x 12mm fixing Ankers. Any questions please contact me. Thank you for viewing my listing.

]]> https://mydiamondcoredrill.com/hilti-dd-st-150-u-diamond-core-drilling-stand-102mm-hilti-core-bit/feed/ 0