https://mydiamondcoredrill.com Fri, 02 Oct 2026 00:07:53 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://mydiamondcoredrill.com/weka-heavy-duty-110v-core-drill-on-adjustable-drilling-rig-stand-working-order/ https://mydiamondcoredrill.com/weka-heavy-duty-110v-core-drill-on-adjustable-drilling-rig-stand-working-order/#comments Tue, 29 Sep 2026 12:01:44 +0000 https://mydiamondcoredrill.com/weka-heavy-duty-110v-core-drill-on-adjustable-drilling-rig-stand-working-order/









Top quality Weka heavy duty diamond core drill in working order. The rig is good – nice and smooth going up and down and has a thumb screw to hold the position in place. The rig has bolt holes on the base plate to be mounted to a wall.

]]> https://mydiamondcoredrill.com/weka-heavy-duty-110v-core-drill-on-adjustable-drilling-rig-stand-working-order/feed/ 0 https://mydiamondcoredrill.com/vevor-diamond-core-drilling-machine-unmatched-power-and-durability-in-2025/ https://mydiamondcoredrill.com/vevor-diamond-core-drilling-machine-unmatched-power-and-durability-in-2025/#comments Sat, 26 Sep 2026 11:54:30 +0000 https://mydiamondcoredrill.com/vevor-diamond-core-drilling-machine-unmatched-power-and-durability-in-2025/ ]]> https://mydiamondcoredrill.com/vevor-diamond-core-drilling-machine-unmatched-power-and-durability-in-2025/feed/ 0 https://mydiamondcoredrill.com/o18-350mm-wet-diamond-drilling-core-drill-bit-turbo-segments-for-brick-masonry-2/ https://mydiamondcoredrill.com/o18-350mm-wet-diamond-drilling-core-drill-bit-turbo-segments-for-brick-masonry-2/#comments Wed, 23 Sep 2026 23:37:41 +0000 https://mydiamondcoredrill.com/o18-350mm-wet-diamond-drilling-core-drill-bit-turbo-segments-for-brick-masonry-2/


Ø18-350mm Wet Diamond Drilling Core Drill Bit Turbo Segments for Brick & Masonry. The concrete fast water drill bit, air conditioner, range hood, water pipe and wall hole opener – diamond water drill bit, features high-quality diamond particles evenly inlaid on the surface of the drill bit matrix. Diamond, as the hardest substance in nature, endows the drill bit with extremely high hardness and wear resistance. The drill bit matrix is made of high-quality alloy steel, which undergoes precision machining and heat treatment, providing excellent strength and toughness to ensure it is not easily deformed or broken under high-speed rotation and complex working conditions. This drill bit can quickly penetrate hard materials such as concrete and brick walls, significantly reducing construction time. Its sharp cutting edge design makes the drilling process smoother, reduces the occurrence of bit jamming, and improves work efficiency. At the same time, the water drill design can effectively cool the drill bit during drilling, reduce the heat generated by friction, extend the service life of the drill bit, and minimize dust flying, keeping the working environment clean. Before use, be sure to check if the drill bit is securely installed to avoid accidents caused by loosening during the drilling process. During drilling, select the appropriate rotational speed and pressure according to the hardness of the material and the drill bit specifications to avoid damaging the drill bit due to excessive speed or pressure. Wear safety equipment such as protective goggles and gloves during operation to prevent injuries from flying debris. After drilling is completed, promptly clean the debris on the drill bit and store it properly to avoid collisions and exposure to damp environments. It is widely used in the construction and decoration industries. It is suitable for scenarios such as drilling holes in walls for air conditioner installation, drilling holes for range hood exhaust pipe installation, and drilling holes in walls for water pipe laying. Whether it is home decoration or commercial construction projects, it can demonstrate its advantage of efficient drilling. Product Name:Wet Diamond Drilling Core Drill Bit Turbo Segments for Brick & Masonry. Cutting Teeth Material: Diamond. Shaft Material:Alloy Steel. Package included: according to your choice. Select your requirements from the drop down menu above. This Product Is Available in Different Dimensions and Can Be Customized to Your Specific Needs. We Are Happy to Help! Due to computers display colors differently, the color may vary slightly from the above images, Thanks for your understanding! Due to different manual measurement methods, the size may be slightly different, please understand. All products in our store are elaborately made. We care about our valued buyers, if you have any questions, our Customer Service staff will be very glad to help you. We try our best to reply to your emails as soon as possible, however, due to the high volume of daily incoming emails and time zone difference, we may not be able to reply to your emails immediately. Please contact me before you return it. Feedback is very important to us. For the functional products in our shop, we make sure that the functions are the same as the description. About the product colour:Because of the different light and environment when the product is photographed, In a few instances the colour of the product may have a little colour difference with the actual colour of the product, I hope you can understand.

]]> https://mydiamondcoredrill.com/o18-350mm-wet-diamond-drilling-core-drill-bit-turbo-segments-for-brick-masonry-2/feed/ 0 https://mydiamondcoredrill.com/hycon-hydraulic-diamond-core-drill-drilling-rig-hycon-hpp06-honda-petrol-pack/ https://mydiamondcoredrill.com/hycon-hydraulic-diamond-core-drill-drilling-rig-hycon-hpp06-honda-petrol-pack/#comments Fri, 28 Aug 2026 22:39:41 +0000 https://mydiamondcoredrill.com/hycon-hydraulic-diamond-core-drill-drilling-rig-hycon-hpp06-honda-petrol-pack/


















Hycon Hydraulic Diamond Core Drill Drilling Rig & Hycon HPP06 Honda Petrol Pack. Complete with a used 112mm Diamond Core Bit. Tested under load prior to advertising. Please call for more details or to view on. Collection can be arranged from Harefield, Middlesex. Junction 16 or 17 off of the M25.

]]> https://mydiamondcoredrill.com/hycon-hydraulic-diamond-core-drill-drilling-rig-hycon-hpp06-honda-petrol-pack/feed/ 0 https://mydiamondcoredrill.com/220v-2300w-diamond-core-drill-press-concrete-drilling-machine-stand-o-165mm-new-3/ https://mydiamondcoredrill.com/220v-2300w-diamond-core-drill-press-concrete-drilling-machine-stand-o-165mm-new-3/#comments Wed, 26 Aug 2026 10:34:38 +0000 https://mydiamondcoredrill.com/220v-2300w-diamond-core-drill-press-concrete-drilling-machine-stand-o-165mm-new-3/









Product Description Our core drilling machine combines functionality and versatility in one device. It is ideal for lighter drilling work. Feature Water connection with hose approx. 6M Non water seal cage reduce maintenance costs Aluminum alloy material ligher and steadier Max. Drilling diameter 165mm Suitable for sampling concrete, cement, brick, bituminous pavement and block Specifications Color: Red Rated input power: 3300W Rated voltage:220V Rated frequency: 60Hz The largest drilling capacity: 6.5 inch No-load speed: 800r/min Spindle thread:M22(22mm) It fit M22 Drill Bit(sale Separately) The Spindle thread is not 1 1/4!!! Installation: First, install the screw connecting the stand and the pedestal. Before use the drill, you need to fix it. Remove the two screws on the back of. 220V 3300W Diamond Core Drill Press Concrete Drilling Machine Stand Ø 165mm NEW. Welcome to our store. 220V 3300W Diamond Core Drill Press Concrete Drilling Machine Stand ø 165mm UK. Our core drilling machine combines functionality and versatility in one device. Drilling diameter 165mm Suitable for sampling concrete, cement, brick, bituminous pavement and block Details Color: Red Rated input power: 3300W Rated voltage:220V Rated frequency: 60Hz The largest drilling capacity: 6.5 inch No-load speed: 800r/min Spindle thread:M22(22mm) It fit M22 Drill Bit(sale Separately) The Spindle thread is not 1 1/4!! Remove the two screws on the back of the stand; 2. Seperate the stand and the pedestal; 3. Rotate the pedesta 180° and install the screws. Fix the driller: Here are two ways 1. Using expansion link Choose a hollow tube according to the height of the place which need to be drilled. Put one end of the tube against the adjustable screw rod. And turn the rod reversely to fix the driller tightly, expansion bolts are not needed. 2. Using ecpansion bolt Make a hole on the wall or the groud and install the bolt; Expand the bolt; Install the screw rod and the stand. Then tighten the nut. Install drill bit Before installing, you need to smear some grease on the drill end thread in order to discharge easily. After instlling, you need to run the driller at an idle state at first. Attention: Before you install or remove the drill bot, you must be sure the drill is powered off. Before running, the drill must be connected with clean cold water. Here are the ways to inject water: 1. Using tap water: Connecting the tap and the machine with the injecting hose. Hanging a bucket over the drill 3. Using water pump 4. Drilling Start the drill at an idle state. Then open the water tap. When there is water flowing from the drill, you can start drilling. At first, you need to drill slowly and increase strength gradually. After you drill deeper than 5mm, you can increase your push strength. If the drill’s rotating speed decrease, than proves that the drill is overloaded. Then you need to decrease the push strength, avoiding the drill being stuck. If there is smoke coming out, you must pull out the drill right away and start to drill after a while, avoiding the engine being burn down. 5. Material being drilled When drilling reinforced concrete, current increases and the drill will vibrate. Therefore, you need to decrease pushing strength but the decreasing amplitude should not be too big. Otherwise, the effiency will be affected and the drill bit will be worn more badly. When drilling reinforced concrete containing little grains of sand and small stones, the drill may be overloaded suddenly and the drill be powered off automatically. At this time, you need to pull out the drill right away and clean the hole you drilled before you start again. When you drill woof board and thick pitch, you also need to decrease pushing and drill slowly. 6. Taking out drill core When you are going yo drill through the board or wal, you need to slow down, avoiding the drill bit being stuck. If the drill bit is stuck, you need to power off the drill immediately pull out the bit and clean it. Fetch out the drill core. Install the drill bit and start again. Attention: You should be careful when taking out the drill bit, noting damaing it. Then you need to tighten the screws to adjust the distance. At the same time, you need to make sure that the pedestal and the stand is connected firmly. Application: This drill can be used on brick, stone, reinforced concrete, rock, and fireproof materials. Note: M22 drill bit and drill barrel are not included. Welcome O(? _?)O. France, Germany, spain, Italy. Feedback is very important to us. It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. High Quality, Long Service Life. 100% Brand New, With High Quality, Special Fashion Design, Easy installation, 3-year Wrranty. Unique Appearance, Great Durability. Compact Design, Convenient Use. The largest drilling capacity.

]]> https://mydiamondcoredrill.com/220v-2300w-diamond-core-drill-press-concrete-drilling-machine-stand-o-165mm-new-3/feed/ 0 https://mydiamondcoredrill.com/msw-core-drilling-machine-diamond-coring-machine-2000w-1950-rpm/ https://mydiamondcoredrill.com/msw-core-drilling-machine-diamond-coring-machine-2000w-1950-rpm/#comments Tue, 25 Aug 2026 10:31:38 +0000 https://mydiamondcoredrill.com/msw-core-drilling-machine-diamond-coring-machine-2000w-1950-rpm/






Core drilling machine for drills up to 150 mm in diameter The handy core drilling machine MSW-DDM150 from MSW reliably drill holes in hard construction materials such as concrete, masonry or asphalt with the help of diamond core bits. It can also successfully drill large-calibre holes up to 150 mm in diameter. The integrated residual current protection circuit provides protection for both the user and the core drilling machine. Accordingly, there are high requirements when it comes to the devices you use. With 2,000 W and a maximum speed of 1,950 rpm, the diamond core drill from MSW provides generous power reserves for core drillings up to 150 mm in diameter. You can work with a wide variety of diamond drills. The diamond coring machine masters everything from holes in concrete to reinforced concrete, cement, masonry, asphalt and stone. You can drill holes both horizontally and vertically, depending on your needs. Two stable handles which you can securely position to the core drill enable you to drill as appropriate for the material. Depending on the drill diameter, you can drill up to depths of 100 mm. The guide rail enables you to achieve very precise holes up to 160 mm. The equally solid and compact powerhouse can be easily controlled via an intuitive on/off switch on the control panel. The residual current protection circuit (PRCD – Portable Residual Current Device) integrated into the cable provides protection against accidents for the user as well as the drill. Should there be a short circuit in the drill or cable, operation immediately ceases. A restart lock provides further protection in case of power failure. Key features Powerful-high-performance 2,000 W motor Precise-core drilling up to a diameter of 150 mm Effective-speeds of up to 1,950 rpm Variable-suited for hand drilling Safe-residual current protection circuit integrated in the cable Technical details Protection class: II Water hose connection diameter [mm]; 16 Core drill attachment diameter : 1 ¼ Manual: Yes PRCD on cable: Yes Sound power: 102.2 dB Sound pressure level: 91.2 dB Carry case included: Yes Current [A]: 10 Material: Cast aluminium Power [W]: 2000 Voltage [V]: 230 Guide system range [mm]: 160 Max. Drilling diameter [mm]: 150.

]]> https://mydiamondcoredrill.com/msw-core-drilling-machine-diamond-coring-machine-2000w-1950-rpm/feed/ 0 https://mydiamondcoredrill.com/shibuya-diamond-core-drilling-rig-110v-with-box/ https://mydiamondcoredrill.com/shibuya-diamond-core-drilling-rig-110v-with-box/#comments Wed, 19 Aug 2026 22:18:49 +0000 https://mydiamondcoredrill.com/shibuya-diamond-core-drilling-rig-110v-with-box/




Shibuya Diamond Core Drilling Rig 110v With Box in working condition what you see on the box is what you get.

]]> https://mydiamondcoredrill.com/shibuya-diamond-core-drilling-rig-110v-with-box/feed/ 0 https://mydiamondcoredrill.com/what-is-core-drilling-2/ https://mydiamondcoredrill.com/what-is-core-drilling-2/#comments Mon, 10 Aug 2026 22:00:41 +0000 https://mydiamondcoredrill.com/what-is-core-drilling-2/ ]]> https://mydiamondcoredrill.com/what-is-core-drilling-2/feed/ 0 https://mydiamondcoredrill.com/mexco-dcx90-slotted-dry-core-drill-high-performance-diamond-core-for-drilling-3/ https://mydiamondcoredrill.com/mexco-dcx90-slotted-dry-core-drill-high-performance-diamond-core-for-drilling-3/#comments Tue, 04 Aug 2026 21:47:52 +0000 https://mydiamondcoredrill.com/mexco-dcx90-slotted-dry-core-drill-high-performance-diamond-core-for-drilling-3/







Mexco DCX90 Slotted Dry Core Drill, High-Performance Diamond Core for Drilling Masonry Materials 38mm-117mm, 9 Piece Kit with Storage Case. The Mexico DCX90 range offers fast drilling speeds and exceptional all-round performance in various masonry building materials. Engineered with high-quality diamond segments and welded barrels, this dry core drill ensures reliability and longevity for professionals or tradespeople working on demanding drilling tasks. The Mexco DCX90 Core Drill range is ideal for drilling precise, clean holes in various masonry and building materials including soft/medium faced bricks, concrete blocks, sandstone, soft slate and breeze blocks. This compact and versatile 9 piece kit can drill holes from 38mm 117mm Mexco dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. High-Quality Slotted and Fluted Barrel Allowing for fast waste removal, ensuring cleaner, faster drilling whilst prolonging the lifespan of the core drill. High Diamond Concentration and Fast Drilling Speeds – The Long Life Segment with a high concentration of diamonds provide outstanding durability, performance and extended tool life; designed to offer fast drilling speeds and all-round performance in various masonry building materials without compromising on quality. 9 Piece Set with Carry Case – The Mexco DCX90 Slotted Dry Core Drill 9 Piece Kit includes 38mm, 52mm, 117mm drill sizes; the Core Drill set comes organised and protected in a robust plastic and aluminium carry case for added convenience. Four Different Adaptors Included – Providing a secure connection and good cutting performance when drilling through tough materials. Applications – The Mexco DCX90 range is ideal for drilling precise, clean holes in various masonry and building materials including soft/medium faced bricks, concrete blocks, sandstone, soft slate and breeze blocks. Whenever possible, items are dispatched from our own stock. However, we also source products through other supply channels. In such cases, orders may be fulfilled by our fulfillment centers or third-party suppliers at our discretion. As a result, some products may arrive with third-party branding on the packaging. Your details will not be used for any other reason and remain completely secure. IF YOU DO NOT AGREE TO THESE TERMS, PLEASE REFRAIN FROM PURCHASING FROM US! We strive to provide all our customers with an exceptional shopping experience. Your feedback is extremely important to us! If you have any issues with your order or any questions, please reach out to us before leaving feedbackwere happy to help! Carefully crafted by Kepa Design.

]]> https://mydiamondcoredrill.com/mexco-dcx90-slotted-dry-core-drill-high-performance-diamond-core-for-drilling-3/feed/ 0 https://mydiamondcoredrill.com/diamond-core-drill-machine-heavy-duty-concrete-drilling-demo-u0026-features/ https://mydiamondcoredrill.com/diamond-core-drill-machine-heavy-duty-concrete-drilling-demo-u0026-features/#comments Sun, 02 Aug 2026 09:40:31 +0000 https://mydiamondcoredrill.com/diamond-core-drill-machine-heavy-duty-concrete-drilling-demo-u0026-features/ ]]> https://mydiamondcoredrill.com/diamond-core-drill-machine-heavy-duty-concrete-drilling-demo-u0026-features/feed/ 0