https://mydiamondcoredrill.com Tue, 25 Aug 2026 10:31:38 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://mydiamondcoredrill.com/2200w-core-drilling-machine-with-press-drill-stand-wet-diamond-concrete-driller/ https://mydiamondcoredrill.com/2200w-core-drilling-machine-with-press-drill-stand-wet-diamond-concrete-driller/#comments Sun, 12 Nov 2023 23:57:51 +0000 https://mydiamondcoredrill.com/2200w-core-drilling-machine-with-press-drill-stand-wet-diamond-concrete-driller/
















Specification Model: CD-S2200-180A Material: Copper, Aluminum Alloy, Iron, Plastic, Rubber, Steel Color: Red Process: Plastic Spraying Plug: EU Standard Voltage: 220V 50HZ Input Power: 2200W No-load Speed: 1200RPM Water Seal Design: Copper Tube Maximum Milling Diameter:? 180MM/7.1IN Gross Weight: 14.6kg/32.18lbs Package Size: 803619cm/31.514.27.5in Max. Bracket Adjustable Height: 58cm/22.83in Package Included 1Concrete Drilling Rig All Accessories Needed for Installation.

]]> https://mydiamondcoredrill.com/2200w-core-drilling-machine-with-press-drill-stand-wet-diamond-concrete-driller/feed/ 0 https://mydiamondcoredrill.com/core-drilling-machine-with-press-drill-stand-wet-diamond-concrete-driller-2200w-2/ https://mydiamondcoredrill.com/core-drilling-machine-with-press-drill-stand-wet-diamond-concrete-driller-2200w-2/#comments Tue, 04 Jul 2023 07:29:00 +0000 https://mydiamondcoredrill.com/core-drilling-machine-with-press-drill-stand-wet-diamond-concrete-driller-2200w-2/
















Application It is used in drilling reinforced concrete, brick, marble, and other materials, suitable for wall opening, demolition, installation of air conditioners, pipes, stair handrails, bridges, airports and highways, and other scenarios. Specification Model: CD-S2200-180A Material: Copper, Aluminum Alloy, Iron, Plastic, Rubber, Steel Color: Red Process: Plastic Spraying Plug: EU Standard Voltage: 220V 50HZ Input Power: 2200W No-load Speed: 1200RPM Water Seal Design: Copper Tube Maximum Milling Diameter: F180MM/7.1IN Gross Weight: 14.6kg/32.18lbs Package Size: 803619cm/31.514.27.5in Max. Bracket Adjustable Height: 58cm/22.83in Package Included 1Concrete Drilling Rig All Accessories Needed for Installation. Core Drilling Machine with Press Drill Stand Wet Diamond Concrete Driller 2200W. 2200w Core Drill Core Drill Core Drilling Machine Wet Dry Drilling Up To 1200rpm. It is a concrete drilling rig that can greatly improve drilling efficiency and reduce workload. With 2200-watt power, pure copper motor, convenient operation, and dual use of dry and wet design, it brings you a new drilling experience. It is a good assistant for decoration, construction, and maintenance. It is used in drilling reinforced concrete, brick, marble, and other materials, suitable for wall opening, demolition, installation of air conditioners, pipes, stair handrails, bridges, airports and highways, and other scenarios. Material: Copper, Aluminum Alloy, Iron, Plastic, Rubber, Steel. Water Seal Design: Copper Tube. Maximum Milling Diameter: f180MM/7.1IN. Gross Weight: 14.6kg/32.18lbs. Package Size: 803619cm/31.514.27.5in. Bracket Adjustable Height: 58cm/22.83in. All Accessories Needed for Installation. Pure Copper Motor: The product adopts a pure copper motor with stable power, low heat dissipation, and low noise to provide excellent performance and maintain strong power and high efficiency even after a long time of use. Strong Power: With 2200 watts input power and an excellent pure copper motor, this concrete drilling rig presents a high speed of 1200RPM to drill standard holes in walls and floors easily, which enhances the working efficiency. Wet and Dry Use: The concrete drilling rig can be used for wet drilling when water is applied. When the water seal is turned off, it can be used for dry drilling. The wet and dry design allows it to be used in a wide range of applications. Flexible Adjustment: The product has an infinitely variable speed switch that allows you to easily adjust the drilling speed according to your needs. The height of the bracket is adjustable (up to 22.83 inches), which makes the operation more flexible. High-quality Materials: The concrete drilling rig is made of high-quality iron and aluminum alloy, which is very strong, durable, and not easily deformed. Multi-angle Operation: The anti-slip auxiliary handle of the product can be installed in multiple directions to facilitate multi-angle operation. Moreover, the detachable shoulder bracket handle and auxiliary handle make the operation more flexible and convenient. Vertical Handheld 2-in-1: The detachable stand allows the option of vertical or handheld operation, which makes drilling more flexible and convenient to suit different scenarios. Smooth Lifting: The bracket is equipped with high-precision and neat racking to ensure the head is smoothly lifted and not easily shaken, which greatly improves the flexibility of the product. Excellent Heat Dissipation Capability: The aluminum alloy housing and multiple heat dissipation holes of the product can dissipate heat in time to ensure long and stable operation. High Safety: The gearbox has a built-in gear mechanical clutch. When the high-speed rotation causes the rig to lock, the gear and motor will be mechanically separated in time to ensure the safety of the motor and you. And the overload protection button of the product can prevent overload to improve safety and durability. Convenient Operation: The concrete drilling machine is equipped with an extended joystick to make the operation more convenient and labor-saving. The external carbon brush port is convenient to observe the use of carbon brush and replace it in time. Customer Service: We aim to provide quality products and services. We will reply and solve the problem for you as soon as possible. Anti-slip Handles: The surface of the rubber handles is equipped with an uneven anti-slip design to bring you a comfortable touch and effective anti-slip. Sturdy Bracket: The bracket surface adopts a plastic spraying process to make it more wear-resistant and corrosion-resistant, which extends the service life. Robust Output Shaft: The output shaft is made of special steel with high hardness, which is very sturdy and durable. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. France, Germany, spain, Italy. Feedback is very important to us. It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

]]> https://mydiamondcoredrill.com/core-drilling-machine-with-press-drill-stand-wet-diamond-concrete-driller-2200w-2/feed/ 0 https://mydiamondcoredrill.com/core-drilling-machine-with-press-drill-stand-wet-diamond-concrete-driller-2200w/ https://mydiamondcoredrill.com/core-drilling-machine-with-press-drill-stand-wet-diamond-concrete-driller-2200w/#comments Thu, 13 Apr 2023 01:36:52 +0000 https://mydiamondcoredrill.com/core-drilling-machine-with-press-drill-stand-wet-diamond-concrete-driller-2200w/
















Application It is used in drilling reinforced concrete, brick, marble, and other materials, suitable for wall opening, demolition, installation of air conditioners, pipes, stair handrails, bridges, airports and highways, and other scenarios. Specification Model: CD-S2200-180A Material: Copper, Aluminum Alloy, Iron, Plastic, Rubber, Steel Color: Red Process: Plastic Spraying Plug: EU Standard Voltage: 220V 50HZ Input Power: 2200W No-load Speed: 1200RPM Water Seal Design: Copper Tube Maximum Milling Diameter: F180MM/7.1IN Gross Weight: 14.6kg/32.18lbs Package Size: 803619cm/31.514.27.5in Max. Bracket Adjustable Height: 58cm/22.83in Package Included 1Concrete Drilling Rig All Accessories Needed for Installation. 2200W Diamond Core Drill Concrete Drill Machine w/ Stand Press Drill Bits(180mm). 2200w Core Drill Core Drill Core Drilling Machine Wet Dry Drilling Up To 1200rpm. It is a concrete drilling rig that can greatly improve drilling efficiency and reduce workload. With 2200-watt power, pure copper motor, convenient operation, and dual use of dry and wet design, it brings you a new drilling experience. It is a good assistant for decoration, construction, and maintenance. It is used in drilling reinforced concrete, brick, marble, and other materials, suitable for wall opening, demolition, installation of air conditioners, pipes, stair handrails, bridges, airports and highways, and other scenarios. Material: Copper, Aluminum Alloy, Iron, Plastic, Rubber, Steel. Water Seal Design: Copper Tube. Maximum Milling Diameter: f180MM/7.1IN. Gross Weight: 14.6kg/32.18lbs. Package Size: 803619cm/31.514.27.5in. Bracket Adjustable Height: 58cm/22.83in. All Accessories Needed for Installation. Pure Copper Motor: The product adopts a pure copper motor with stable power, low heat dissipation, and low noise to provide excellent performance and maintain strong power and high efficiency even after a long time of use. Strong Power: With 2200 watts input power and an excellent pure copper motor, this concrete drilling rig presents a high speed of 1200RPM to drill standard holes in walls and floors easily, which enhances the working efficiency. Wet and Dry Use: The concrete drilling rig can be used for wet drilling when water is applied. When the water seal is turned off, it can be used for dry drilling. The wet and dry design allows it to be used in a wide range of applications. Flexible Adjustment: The product has an infinitely variable speed switch that allows you to easily adjust the drilling speed according to your needs. The height of the bracket is adjustable (up to 22.83 inches), which makes the operation more flexible. High-quality Materials: The concrete drilling rig is made of high-quality iron and aluminum alloy, which is very strong, durable, and not easily deformed. Multi-angle Operation: The anti-slip auxiliary handle of the product can be installed in multiple directions to facilitate multi-angle operation. Moreover, the detachable shoulder bracket handle and auxiliary handle make the operation more flexible and convenient. Vertical Handheld 2-in-1: The detachable stand allows the option of vertical or handheld operation, which makes drilling more flexible and convenient to suit different scenarios. Smooth Lifting: The bracket is equipped with high-precision and neat racking to ensure the head is smoothly lifted and not easily shaken, which greatly improves the flexibility of the product. Excellent Heat Dissipation Capability: The aluminum alloy housing and multiple heat dissipation holes of the product can dissipate heat in time to ensure long and stable operation. High Safety: The gearbox has a built-in gear mechanical clutch. When the high-speed rotation causes the rig to lock, the gear and motor will be mechanically separated in time to ensure the safety of the motor and you. And the overload protection button of the product can prevent overload to improve safety and durability. Convenient Operation: The concrete drilling machine is equipped with an extended joystick to make the operation more convenient and labor-saving. The external carbon brush port is convenient to observe the use of carbon brush and replace it in time. Customer Service: We aim to provide quality products and services. We will reply and solve the problem for you as soon as possible. Anti-slip Handles: The surface of the rubber handles is equipped with an uneven anti-slip design to bring you a comfortable touch and effective anti-slip. Sturdy Bracket: The bracket surface adopts a plastic spraying process to make it more wear-resistant and corrosion-resistant, which extends the service life. Robust Output Shaft: The output shaft is made of special steel with high hardness, which is very sturdy and durable. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. France, Germany, spain, Italy. Feedback is very important to us. It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Business, Office & Industrial\Power Tools\Drills\Drills\Corded Drills”. The seller is “toptoolstation” and is located in this country: DE. This item can be shipped to all countries in Europe.

• Features: NEW DESIGN
• Brand: Unbranded
• Name: Drilling Machine
• Drilling Machine: Φ180MM/7.1IN
• Voltage: 220V 50HZ
• Input Power: 2200W
• Water seal design: Copper Tube
• Fit for: Dry and wet drilling
• Type: Diamond core drilling machine

]]> https://mydiamondcoredrill.com/core-drilling-machine-with-press-drill-stand-wet-diamond-concrete-driller-2200w/feed/ 0 https://mydiamondcoredrill.com/introduction-to-drilling-for-entry-level-driller-offsiders/ https://mydiamondcoredrill.com/introduction-to-drilling-for-entry-level-driller-offsiders/#comments Wed, 02 Mar 2022 17:20:45 +0000 https://mydiamondcoredrill.com/introduction-to-drilling-for-entry-level-driller-offsiders/ ]]> https://mydiamondcoredrill.com/introduction-to-drilling-for-entry-level-driller-offsiders/feed/ 0 https://mydiamondcoredrill.com/a-day-in-a-life-of-a-driller-s-offsider-recruitment/ https://mydiamondcoredrill.com/a-day-in-a-life-of-a-driller-s-offsider-recruitment/#comments Thu, 03 Jun 2021 19:10:28 +0000 http://mydiamondcoredrill.com/a-day-in-a-life-of-a-driller-s-offsider-recruitment/ ]]> https://mydiamondcoredrill.com/a-day-in-a-life-of-a-driller-s-offsider-recruitment/feed/ 0 https://mydiamondcoredrill.com/165mm-wetdry-diamond-core-drill-concrete-driller-machine-with-stand-fit-m22-3300w/ https://mydiamondcoredrill.com/165mm-wetdry-diamond-core-drill-concrete-driller-machine-with-stand-fit-m22-3300w/#comments Sat, 26 Dec 2020 10:30:17 +0000 http://mydiamondcoredrill.com/165mm-wetdry-diamond-core-drill-concrete-driller-machine-with-stand-fit-m22-3300w/













You may also like. 165mm Diamond Core Drill Concrete Drill Machine with Stand fit M22 Wet/Dry 3300W. Our core drilling machine combines functionality and versatility in one device. It is ideal for lighter drilling work. Feature Water connection with hose approx. 6M Non water seal cage reduce maintenance costs Aluminum alloy material ligher and steadier Max. Drilling diameter 165mm Suitable for sampling concrete, cement, brick, bituminous pavement and block Specifications Color: Red Rated input power: 3300W Rated voltage:220V Rated frequency: 60Hz The largest drilling capacity: 6.5 inch No-load speed: 0-850 r/min Spindle threadM2222mm It fit M22 Drill Bit(sale Separately) The Spindle thread is not 1 1/4!!! Installation: First, install the screw connecting the stand and the pedestal. Before use the drill, you need to fix it. Remove the two screws on the back of the stand; 2. Seperate the stand and the pedestal; 3. Rotate the pedesta 180° and install the screws. Fix the driller: Here are two ways 1Using expansion link Choose a hollow tube according to the height of the place which need to be drilled. Put one end of the tube against the adjustable screw rod. And turn the rod reversely to fix the driller tightly, expansion bolts are not needed. 2Using ecpansion bolt Make a hole on the wall or the groud and install the bolt; Expand the bolt; Install the screw rod and the stand. Then tighten the nut. Install drill bit Before installing, you need to smear some grease on the drill end thread in order to discharge easily. After instlling, you need to run the driller at an idle state at first. Attention: Before you install or remove the drill bot, you must be sure the drill is powered off. Before running, the drill must be connected with clean cold water. Here are the ways to inject water: 1. Using tap water: Connecting the tap and the machine with the injecting hose. Hanging a bucket over the drill 3. Using water pump 4Drilling Start the drill at an idle state. Then open the water tap. When there is water flowing from the drill, you can start drilling. At first, you need to drill slowly and increase strength gradually. After you drill deeper than 5mm, you can increase your push strength. If the drill’s rotating speed decrease, than proves that the drill is overloaded. Then you need to decrease the push strength, avoiding the drill being stuck. If there is smoke coming out, you must pull out the drill right away and start to drill after a while, avoiding the engine being burn down. 5Material being drilled When drilling reinforced concrete, current increases and the drill will vibrate. Therefore, you need to decrease pushing strength but the decreasing amplitude should not be too big. Otherwise, the effiency will be affected and the drill bit will be worn more badly. When drilling reinforced concrete containing little grains of sand and small stones, the drill may be overloaded suddenly and the drill be powered off automatically. At this time, you need to pull out the drill right away and clean the hole you drilled before you start again. When you drill woof board and thick pitch, you also need to decrease pushing and drill slowly. 6Taking out drill core When you are going yo drill through the board or wal, you need to slow down, avoiding the drill bit being stuck. If the drill bit is stuck, you need to power off the drill immediately pull out the bit and clean it. Fetch out the drill core. Install the drill bit and start again. Attention: You should be careful when taking out the drill bit, noting damaing it. Then you need to tighten the screws to adjust the distance. At the same time, you need to make sure that the pedestal and the stand is connected firmly. Application: This drill can be used on brick, stone, reinforced concrete, rock, and fireproof materials. France , Germany , spain , Italy. Feedback is very important to us. It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. The item “165mm Wet/Dry Diamond Core Drill Concrete Driller Machine with Stand fit M22 3300W” is in sale since Thursday, September 24, 2020. This item is in the category “Business, Office & Industrial\Industrial Tools\Drilling Tools\Drills”. The seller is “autopartstop666″ and is located in Basel. This item can be shipped worldwide.

• note: not ship to Canarias
• MPN: OB23DRILLING03
• Brand: Unbranded
• Voltage: 220V
• Rated Input Power: 3300W
• No-load speed: 0-850 r/min
• Rated frequency: 60Hz
• The largest drilling capacity: 6.5 inch
• Type: Power Drills
• Voltage (V): 220V
• Power (W): 3300W
• Diameter: 165mm
• Sub-Type: Drill
• Country/Region of Manufacture: China

]]> https://mydiamondcoredrill.com/165mm-wetdry-diamond-core-drill-concrete-driller-machine-with-stand-fit-m22-3300w/feed/ 0 https://mydiamondcoredrill.com/2-speed-core-drilling-unit-diamond-driller-punching-concrete-machine-50-60hz/ https://mydiamondcoredrill.com/2-speed-core-drilling-unit-diamond-driller-punching-concrete-machine-50-60hz/#comments Sun, 14 Apr 2019 10:09:57 +0000 http://mydiamondcoredrill.com/2-speed-core-drilling-unit-diamond-driller-punching-concrete-machine-50-60hz/













Sign up to Newsletters. 4450W Wet/Dry Diamond Core Drill Drilling Machine Ø 255mm w/Stand. Is designed for diamond core drilling. This drill will cut up to 255mm(10 inch) holes in reinforced concrete, brick, stone, rock, ceramic, and fireproof materials. Drill features safety clutch and overload protection. The core drill is fitted with a personal protection switch and Stand base. The Cooling water connection also makes it works more sturdily. The drill is fitted with a safety clutch. Brand NEW 10 portable coring drill with a stand. It’s a high quality high output unit. We’ll usually answer emails questions as soon as possible , Thanks for shopping! Handled by a Crank easily. Non water seal cage reduce maintenance costs. Secondary hardening gears more durable & powerful. Material lighter and steadier. Shank Diameter: 1-1/4 in. Dimension: 850 x 350 x 200mm. Weight: 30.64 kg. Rotate speed: 580 R/min. 1 X 4450W Rock Core Drill Machine. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. 7:00am-13:00pm (Berlin Time). In the same day. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “2 Speed Core Drilling Unit Diamond Driller Punching Concrete Machine 50-60Hz” is in sale since Wednesday, May 17, 2017. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Corded Drills”. The seller is “localitemlocationforsale” and is located in Jenec. This item can be shipped to all countries in Europe, United States, Australia.

• Brand: VEVOR
• MPN: XZCXZ009
• Voltage (V): 230V
• Corded/ Cordless: Corded
• Power (W): 4450W
• Max Drilling Diameter: 10″/255mm
• Rotate speed: 580 R/min
• Dimension: 850 x 350 x 200mm

]]> https://mydiamondcoredrill.com/2-speed-core-drilling-unit-diamond-driller-punching-concrete-machine-50-60hz/feed/ 0 https://mydiamondcoredrill.com/marcrist-dsu850-socket-driller-diamond-core-bits-pro-o-82-mm-m16/ https://mydiamondcoredrill.com/marcrist-dsu850-socket-driller-diamond-core-bits-pro-o-82-mm-m16/#comments Wed, 05 Dec 2018 13:41:18 +0000 http://mydiamondcoredrill.com/marcrist-dsu850-socket-driller-diamond-core-bits-pro-o-82-mm-m16/


Marcrist DSU850 Dosensenker M16 Ø 82 mm. Für den Elektrohandwerker Profi. Blitzschneller Dosensenker Extrem hohe Standzeit. Weshalb mich : EXTREM SCHNELL. Für Kalksandstein, Porenbeton und Ziegelstein. The item “Marcrist dsu850 Socket Driller Diamond Core Bits Pro Ø 82 mm M16″ is in sale since Wednesday, January 29, 2014. This item is in the category “Business, Office & Industrial\Power Tools\Drills\Drill Bits & Accessories\Drill Bits”. The seller is “nordmanndiamanttechnikgmbh13″ and is located in Lehrte. This item can be shipped worldwide.

• MPN: 248.101.0082
• Brand: Marcrist
• EAN: 5036197051766

]]> https://mydiamondcoredrill.com/marcrist-dsu850-socket-driller-diamond-core-bits-pro-o-82-mm-m16/feed/ 0 https://mydiamondcoredrill.com/2-speed-core-drilling-unit-diamond-driller-2600w-10-detection-concrete-popular/ https://mydiamondcoredrill.com/2-speed-core-drilling-unit-diamond-driller-2600w-10-detection-concrete-popular/#comments Sat, 14 Apr 2018 01:51:54 +0000 http://mydiamondcoredrill.com/2-speed-core-drilling-unit-diamond-driller-2600w-10-detection-concrete-popular/













Sign up to Newsletters. Core Drilling bits diamond Concrete Boring Punch Machine. 4450W/ 255 mm Core Drilling. Is designed for diamond core drilling. This drill will cut up to 255mm(10 inch) holes in reinforced concrete, brick, stone, rock, ceramic, and fireproof materials. Drill features safety clutch and overload protection. The core drill is fitted with a personal protection switch and Stand base. The Cooling water connection also makes it works more sturdily. The drill is fitted with a safety clutch. Brand NEW 10 portable coring drill with a stand. It’s a high quality high output unit. We’ll usually answer emails questions as soon as possible , Thanks for shopping! Handled by a Crank easily. Non water seal cage reduce maintenance costs. Secondary hardening gears more durable & powerful. Material lighter and steadier. Max Drilling Diameter: 10/255mm. Dimension: 850 x 350 x 200mm. Weight: 30.64 kg. Rotate speed: 580 R/min. 1 X 4450W 220V Rock Core Drill Machine. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. 7:00am-13:00pm (Berlin Time). In the same day. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Bremen, DE. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “2 Speed Core Drilling Unit Diamond Driller 2600W 10 Detection Concrete POPULAR” is in sale since Monday, February 13, 2017. This item is in the category “Business, Office & Industrial\Industrial Tools\Drilling Tools\Drill Bits”. The seller is “hotitemsale” and is located in Bremen. This item can be shipped to all countries in Europe, United States, Australia.

• Unit Quantity: 1
• Unit Type: PC
• Type: 255MM Core Drilling Machine
• Brand: VEVOR Malbücher
• MPN: g7874005
• Country/Region of Manufacture: China
• Length: 1.25In(Tool holder)
• Voltage (V): 220V / 50Hz
• Power (W): Corded
• Diameter: 255MM
• Drill Bits &; Chucks: Core Drill Bits
• Tool holder: 1 inch
• Max Drilling Diameter: 10inch/255mm
• Rated Input Power: 2600W
• Rated Voltage: 220V
• Rated Frequency: 50-60Hz
• Dimension: 850 x 350 x 200mm
• Weight: 30.64 kg
• Warranty: 2 Years

]]> https://mydiamondcoredrill.com/2-speed-core-drilling-unit-diamond-driller-2600w-10-detection-concrete-popular/feed/ 0 https://mydiamondcoredrill.com/2-speed-core-drilling-unit-diamond-driller-dimension-industrial-boring-great/ https://mydiamondcoredrill.com/2-speed-core-drilling-unit-diamond-driller-dimension-industrial-boring-great/#comments Fri, 13 Apr 2018 19:49:47 +0000 http://mydiamondcoredrill.com/2-speed-core-drilling-unit-diamond-driller-dimension-industrial-boring-great/













Core Drilling bits diamond Concrete Boring Punch Machine. 4450W/ 255 mm Core Drilling. Is designed for diamond core drilling. This drill will cut up to 255mm(10 inch) holes in reinforced concrete, brick, stone, rock, ceramic, and fireproof materials. Drill features safety clutch and overload protection. The core drill is fitted with a personal protection switch and Stand base. The Cooling water connection also makes it works more sturdily. The drill is fitted with a safety clutch. Brand NEW 10 portable coring drill with a stand. It’s a high quality high output unit. We’ll usually answer emails questions as soon as possible , Thanks for shopping! Handled by a Crank easily. Non water seal cage reduce maintenance costs. Secondary hardening gears more durable & powerful. Material lighter and steadier. Max Drilling Diameter: 10/255mm. Dimension: 850 x 350 x 200mm. Weight: 30.64 kg. Rotate speed: 580 R/min. 1 X 4450W 220V Rock Core Drill Machine. Sign up to newsletter. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. 7:00am-13:00pm (Berlin Time). In the same day. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Bremen, DE. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “2 Speed Core Drilling Unit Diamond Driller Dimension Industrial Boring GREAT” is in sale since Wednesday, March 29, 2017. This item is in the category “Business, Office & Industrial\Industrial Tools\Drilling Tools\Drill Bits”. The seller is “industry-village” and is located in Bremen. This item can be shipped to all countries in Europe, United States, Australia.

• Unit Quantity: 1
• Unit Type: PC
• Type: 255MM Core Drilling Machine
• Brand: VEVOR
• MPN: ZZCXU004
• Country/Region of Manufacture: China
• Length: 1.25In(Tool holder)
• Voltage (V): 220V / 50Hz
• Power (W): Corded
• Diameter: 255MM
• Drill Bits &; Chucks: Core Drill Bits
• Tool holder: 1 inch
• Max Drilling Diameter: 10inch/255mm
• Rated Input Power: 2600W
• Rated Voltage: 220V
• Rated Frequency: 50-60Hz
• Dimension: 850 x 350 x 200mm
• Weight: 30.64 kg
• Warranty: 2 Years
• EAN: 800000534556

]]> https://mydiamondcoredrill.com/2-speed-core-drilling-unit-diamond-driller-dimension-industrial-boring-great/feed/ 0